Homepage | Set Home | Add to Favorites
Member

Wuhan Xinhuafeng Mechanical Manufacturing Co.,Ltd


Products
  • No Category
Search
 

Friends links

Excavator Part 2M2858 Floating Seal
Click image to view full size image
Product: Views:454Excavator Part 2M2858 Floating Seal 
Unit price: Negotiable
MOQ:
Quantity:
Delivery date: Since the payment date Days delivery
Valid until: Long-term effective
Last updated: 2019-01-29 18:54
  Inquiry
Details

Description:

This kind of floating seal usually install on bottom roller/carrier roller/front idler/sprocket of Excavator, the assembly of a floating seal is made up of two matching halves,each half has a metal ring and a rubber ring.

 

Detailed Description:

The floating seal is extruded against rubber ring by collar and floating seal ring to form primary sealing, and then the mating of sealing face of two floating seal rings (by oil film lubrication to allow one ring moving and the other still) to form secondary sealing. Therefore, the rubber gasket and metal ring are equally important to floating seal, and correct and professional installation must be emphasized. Based on the past experience, the installation requirement for floating seal using O-type rubber gasket is slightly higher, so it is normal to observe a little lubricating oil is spilled out from the mating face of floating seal ring external diameter during about one-hour movement for commissioning when it is just installed, which is not oil leakage. After the commissioning, oil spilling will stop. Otherwise, it may be caused by incorrect installation or other reasons. The problem must be concerned and solved.


2M2858 can be used in Caterpillar excavator model:  205B ,211B ,215 ,215B ,225 ,229   

 


Properties:

Part No

Outside Diameter

Inside  Diameter

Height

HRC

Working Surface Flatness

Working Surface Roughness

Raw Material

2M2858

82.5mm

63.5mm

32mm

58-62

≤3μm

≤0.8μm

100Cr6


http://www.floating-seal.com/

Inquiry